Printer Profiles - Revision history

Nizzem: /* BambuLab P1S/X1C 0.08mm HueForge preset. */

2024-12-13T00:34:28Z

BambuLab P1S/X1C 0.08mm HueForge preset.

← Older revision		Revision as of 20:34, 12 December 2024
Line 13:		Line 13:
	"from": "User",		"from": "User",
	"inherits": "0.08mm Extra Fine @BBL X1C",		"inherits": "0.08mm Extra Fine @BBL X1C",
	"initial_layer_print_height": "0.2		"initial_layer_print_height": "0.2",
	",
	"initial_layer_speed": "60",		"initial_layer_speed": "60",
	"inner_wall_speed": "250",		"inner_wall_speed": "250",
Line 34:		Line 33:
	}		}
	</pre>		</pre>




	=== <u>BambuLab P1S/X1C 0.04mm HueForge preset.</u> ===		=== <u>BambuLab P1S/X1C 0.04mm HueForge preset.</u> ===

HueForge at 17:45, 21 November 2024

2024-11-21T17:45:48Z

← Older revision		Revision as of 13:45, 21 November 2024
Line 1:		Line 1:
	Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs...		Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs...

			Note: "zig-zag" is what BambuStudio calls Rectilinear.
	=== <u>BambuLab P1S/X1C 0.08mm HueForge preset.</u> ===		=== <u>BambuLab P1S/X1C 0.08mm HueForge preset.</u> ===
	<pre>		<pre>

Nizzem: /* BambuLab P1S/X1C 0.04mm HueForge preset. */

2024-09-27T14:26:03Z

BambuLab P1S/X1C 0.04mm HueForge preset.

← Older revision		Revision as of 10:26, 27 September 2024
Line 51:		Line 51:
	"gap_infill_speed": "200",		"gap_infill_speed": "200",
	"inherits": "0.08mm Extra Fine @BBL X1C",		"inherits": "0.08mm Extra Fine @BBL X1C",
	"initial_layer_print_height": "0.16",		"initial_layer_print_height": "0.2",
	"inner_wall_speed": "200",		"inner_wall_speed": "200",
	"internal_solid_infill_pattern": "alignedrectilinear",		"internal_solid_infill_pattern": "alignedrectilinear",

Nizzem: Created page with "Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs... === BambuLab P1S/X1C 0.08mm HueForge preset. ===

 {     "bottom_shell_layers": "999",     "bottom_surface_pattern": "zig-zag",     "detect_narrow_internal_solid_infill": "0",     "enable_overhang_speed": "0",     "enable_prime_tower": "0",     "ensure_vertical_shell_thickness": "0",     "from": "User",     "inherits": "0.08mm Extra F..."

2024-09-27T14:24:35Z

Created page with "Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs... === BambuLab P1S/X1C 0.08mm HueForge preset. === <pre> { "bottom_shell_layers": "999", "bottom_surface_pattern": "zig-zag", "detect_narrow_internal_solid_infill": "0", "enable_overhang_speed": "0", "enable_prime_tower": "0", "ensure_vertical_shell_thickness": "0", "from": "User", "inherits": "0.08mm Extra F..."

New page

Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs...

=== BambuLab P1S/X1C 0.08mm HueForge preset. ===
<pre>
{
"bottom_shell_layers": "999",
"bottom_surface_pattern": "zig-zag",
"detect_narrow_internal_solid_infill": "0",
"enable_overhang_speed": "0",
"enable_prime_tower": "0",
"ensure_vertical_shell_thickness": "0",
"from": "User",
"inherits": "0.08mm Extra Fine @BBL X1C",
"initial_layer_print_height": "0.2
",
"initial_layer_speed": "60",
"inner_wall_speed": "250",
"internal_solid_infill_speed": "150",
"is_custom_defined": "0",
"name": "HueForge - 0.08mm - Classic Walls",
"outer_wall_speed": "250",
"print_settings_id": "HueForge - 0.08mm - Classic Walls",
"slice_closing_radius": "0.1",
"sparse_infill_density": "100%",
"sparse_infill_pattern": "zig-zag",
"sparse_infill_speed": "150",
"top_shell_layers": "1",
"top_shell_thickness": "0",
"top_surface_pattern": "monotonic",
"top_surface_speed": "150",
"version": "1.8.0.25",
"wall_loops": "1"
}
</pre>

=== BambuLab P1S/X1C 0.04mm HueForge preset. ===
<pre>
{
"bottom_shell_layers": "999",
"bottom_surface_pattern": "zig-zag",
"detect_narrow_internal_solid_infill": "0",
"detect_thin_wall": "1",
"enable_overhang_speed": "0",
"enable_prime_tower": "0",
"ensure_vertical_shell_thickness": "0",
"from": "User",
"gap_infill_speed": "200",
"inherits": "0.08mm Extra Fine @BBL X1C",
"initial_layer_print_height": "0.16",
"inner_wall_speed": "200",
"internal_solid_infill_pattern": "alignedrectilinear",
"internal_solid_infill_speed": "150",
"layer_height": "0.04",
"min_bead_width": "50%",
"min_feature_size": "10%",
"name": "Hue Forge - 0.04mm",
"print_settings_id": "Hue Forge - 0.04mm",
"slice_closing_radius": "0",
"sparse_infill_density": "100%",
"sparse_infill_pattern": "zig-zag",
"sparse_infill_speed": "150",
"top_shell_layers": "1",
"top_shell_thickness": "0",
"top_surface_speed": "150",
"version": "1.8.0.25",
"wall_generator": "arachne",
"wall_loops": "1"
}
</pre>