Printer Profiles

Copy preset into notepad, save with .json extension. Import into Bambu Studio by going to File -> Import -> Import Configs...

BambuLab P1S/X1C 0.08mm HueForge preset.

{
    "bottom_shell_layers": "999",
    "bottom_surface_pattern": "zig-zag",
    "detect_narrow_internal_solid_infill": "0",
    "enable_overhang_speed": "0",
    "enable_prime_tower": "0",
    "ensure_vertical_shell_thickness": "0",
    "from": "User",
    "inherits": "0.08mm Extra Fine @BBL X1C",
    "initial_layer_print_height": "0.2
",
    "initial_layer_speed": "60",
    "inner_wall_speed": "250",
    "internal_solid_infill_speed": "150",
    "is_custom_defined": "0",
    "name": "HueForge - 0.08mm - Classic Walls",
    "outer_wall_speed": "250",
    "print_settings_id": "HueForge - 0.08mm - Classic Walls",
    "slice_closing_radius": "0.1",
    "sparse_infill_density": "100%",
    "sparse_infill_pattern": "zig-zag",
    "sparse_infill_speed": "150",
    "top_shell_layers": "1",
    "top_shell_thickness": "0",
    "top_surface_pattern": "monotonic",
    "top_surface_speed": "150",
    "version": "1.8.0.25",
    "wall_loops": "1"
}

BambuLab P1S/X1C 0.04mm HueForge preset.

{
    "bottom_shell_layers": "999",
    "bottom_surface_pattern": "zig-zag",
    "detect_narrow_internal_solid_infill": "0",
    "detect_thin_wall": "1",
    "enable_overhang_speed": "0",
    "enable_prime_tower": "0",
    "ensure_vertical_shell_thickness": "0",
    "from": "User",
    "gap_infill_speed": "200",
    "inherits": "0.08mm Extra Fine @BBL X1C",
    "initial_layer_print_height": "0.2",
    "inner_wall_speed": "200",
    "internal_solid_infill_pattern": "alignedrectilinear",
    "internal_solid_infill_speed": "150",
    "layer_height": "0.04",
    "min_bead_width": "50%",
    "min_feature_size": "10%",
    "name": "Hue Forge - 0.04mm",
    "print_settings_id": "Hue Forge - 0.04mm",
    "slice_closing_radius": "0",
    "sparse_infill_density": "100%",
    "sparse_infill_pattern": "zig-zag",
    "sparse_infill_speed": "150",
    "top_shell_layers": "1",
    "top_shell_thickness": "0",
    "top_surface_speed": "150",
    "version": "1.8.0.25",
    "wall_generator": "arachne",
    "wall_loops": "1"
}